国产AV一区二区三区日韩_国产女人水真多18毛片18精品_日韩国产成人精品视频_少妇高清精品毛片在线视频

?
咨詢熱線: 0513-88400999
?
振動篩

PSZ砂石整形機

丁寶勤 13906276368(技術)

電話:0513-88400999 傳真:0513-88400998 郵箱:jszk@vip.163.com

 PSZ砂石整形機



產品描述 Product description
       PSZ系列砂石整形機是我公司技術人員研發的新型設備,適用于抗壓強度在300MPa以下的各種礦 石和巖石物料顆粒整形,可根據用戶要求,選用不同轉子轉速和不同電機功率的組合,以滿足用戶不同的需要。本系列設備可根據用戶的要求,很方便地改成石打鐵的制砂機,我公司的砂石整形機和制砂機大部分零件可以互通互換。
       PSZ系列砂石整形機由主體、進料管、襯架、軸系、轉子及電動機組成,在物料入口兩側安裝有空 氣循環裝置,使轉子旋轉所產生的風和粉塵在機器內部循環,以減少粉塵污染。而高速旋轉的轉子,由于精確地調整了平衡,從而實現了低噪音、低振動。由于采用了特殊的耐磨件,延長了轉子內易損件的使用壽命。

       PSZ Series Shaping Machine is developed by our company. It is suit for crushing all kinds of rock material which compression strength less than 300 MPa into cubes. According to different needs, the rotor speed and the electrical power can be arbitrar chosen.Some parts of SCBL series can be remodeled into SX series easily.
       PSZ Series Sand Shaping Machine is composed of feeding pipe,shaft,rotor and motor.Air-cycle unit is assembled on two sides of feeding port,which can prevent dust from discharging outside.The rotor going round and round at a high speed produce less noise and vibration .Because we select special,life of the rotor is prolonged.
 
產品特點Features:
■優異的整形性能
■耐磨件數量少,使用壽命長,更換方便,運行成本低
■低噪音、低振動、粉塵少、符合要求
■     Excellent performance;
■     Longer life,lower cost;
■     Less noise,vibration and dust.
 
技術參數表I Technical Date
 
 

型號

進料粒度上限  (mm )

線速度  (m/s )

處理量  (t/h)

電機功率  (kw )

重量(kg )

外型尺寸(mm )

PSZ-1000

40

45

133-174

110×2

17500

5710×2880×3150

40

50

181-220

132×2

17500

5710×2880×3150

PSZ-1200

40

45

185-240

132×2

18300

5710×2880×3150

40

50

220-260

160×2

18300

5710×2880×3150

40

50

255-300

185×2

18300

5710×2880×3150

 

 

 

注:1、以上處理量是在抗壓強度為150-160MPa,堆密度為1.6t/m3,水分不大于1.5%的條件下得出。
2、給料均勻、連續。
3、上表所列是可以破碎物料的給料尺寸,但從破碎率和易損件的壽命考慮,希望提供< 40mm的物料。
Note:1.Above data is get under the condition that compression strength is 150-160 MPa and pile density is 1.6t/m3,and water content does not exceed 1.5%.
2.Feeding is continuous and even.
3.In view of output and service life of damageable parts, it is better to feed material less than 40 mm.
 

下一頁:PS制砂機
產品關鍵詞:PSZ砂石整形機 砂石整形機
相關產品
猜您感興趣的
?
Copyright ? 2006-2019 江蘇中礦重型裝備有限公司 版權所有 蘇ICP備2022047224號-11

蘇公網安備 32062102000318號